Keyswitch trapped in the ON position with two LEDs
£76.92
Ex Vat
In stock
Product code
S1729ST1
Two position keyswitch trapped in the ON position with one red and one green LED.
Flush fitting stainless steel engraved two position keyswitch with one red and one green flat LED in chrome bezels. This is a double pole unit with change over contacts. The keyswitch on this version is trapped in the 1 position. Separate terminals are provided for the LEDs. The LED current limit resistor is provided for 12 vdc operation.
Specification:- Led Current - 20mA per LED @12vdc
- Switch Contacts - DPCO 2A @30vdc
- Sounder Current - N/A
- Visual Indication -1 x red LED 1 x green LED
- Integral Sounder Level - N/A
- Tamper - N/A
- Material - 316 Grade Stainless Steel
- Dimensions - 86 x 86 x 2mm - Facia
- 38mm galvanised back box supplied
- Surface mount using S0610-38
- Weight - 0.28kg
- IP Rating - IP65 front side contact area
- Approvals - UKCA and CE marked, ROHS compliant
Weather gaskets for the rear of plates, anti tamper screws and stainless steel mock pattress surrounds for surface mounting are available, see related products below.
| Country of Origin | UK |
|---|---|
| Condition | New |
| SKU | S1729ST1 |
| Associated Product Codes | S1729ST1 |
| Warranty | 3 Years |
| - |  Installation Instructions for S1729ST1 |
| - |  Product Information Sheet for S1729ST1 |
Write Your Own Review
Check items to add to the basket or
Pin-Hex antitamper screwdriver bit to suit FIX/11
£5.50
Ex Vat
Single gang mock stainless steel pattress 38mm deep
£12.42
Ex Vat
