Exitguard Door Alarm with Integral Keypad Control

Exitguard is the ideal solution for security of fire exit doors. An integral high power sounder is activated when the door is opened to warn those in the vicinity that security has been breached.

• Keypad Control
• Unique Fire Door Checker
• Dimensions 175 x 125 x 60 tapering to 50mm
• High Power Piezo Sounder more than 108db
• Manager codes to restrict users
• Auto Re-arm & Reset Delay (variable)
• Programmable Door Open Too Long Delay 0-88min 58secs
• Quick Reset/Pass and return facility
• Visual Strobing Alarm Indication
• Front & Back Acting Tamper Switch
• Bleep In Off Option
• Chime Facility
• Where applicable battery fault monitor
• Six Selectable Alarm Tones

EX204 is battery powered - Use where a separate supply of power is not available and the protected door is opened infrequently. Depending on usage the 6 x AA batteries supplied can last up to 3 years. The Exitguard will continue to function for at least two weeks after a battery fault indication.

EX205 is 12vdc powered - Use where the protected door may be opened frequently or the integral sounder may need to sound for long periods. There is a logic output signal, volt free relay contacts for separately signalling ON/OFF status/alarm conditions at remote points and can also be used as part of a system. This version cannot be powered from batteries. (Power supply available separately)

EX206 is 240vac mains powered - Use where the protected door may be opened frequently or the sounder may need to sound for long periods. There is a logic output signal, a volt free relay contact for alarm condition. This version is also supplied with 6 x AA alkaline batteries for standby. The batteries will not power the alarm relay.

Supplied with installation instructions, wall fixings, door contact with 1 metre of cable and door warning label.

Exitguard 200 Series Model Comparison