6 way driver interface card for MULTIGUARD indicators
£116.10
Ex Vat
In stock
Product code
MG02000P
6 way driver interface card for MULTIGUARD indicators
The MULTIGUARD MG02000P enable the serial output an MG series MULTIGUARD annunciator to be used to drive remote devices such as LEDs, Overdoor lights, Low power sounders and relays etc.
The MG02000P is supplied on a double gang plastic plate to enable it to be fitted externally to the annunciator at a point closer to the devices it is driving. The pcb can be remove from the plate and fitted inside the MULTIGUARD if desired. To do this the board edges must be snapped off at the score lines prior to fitting in the annunciator back box.
Specification
Specification
- 6 Zones MULTIGUARD output driver card
- 16 Darlington transistor outputs 500ma per channel
- Uses serial data from MULTIGUARD
- Can mount into the back box of MULTIGUARD
- Suitable for remote LED's or low power sounders etc..
- Dimensions 146 x 87 x 15mm
Country of Origin | UK |
---|---|
Condition | New |
SKU | MG02000P |
Associated Product Codes | MG02000P |
Warranty | 3 Years |
- | ![]() |
Write Your Own Review